Children’s Playground Complex 'Oxi Line XOXI405'

Children’s Playground Complex “Oxi Line XOXI405”

Slides, a spiral pole, bridges and an activity course – one playground complex for countless active adventures

Oxi Line XOXI405 is a large professional outdoor children’s playground complex combining platforms at different heights, ramps, three sliding options, a curved tube bridge, rope bridge, spiral pole and activity course to create a varied environment for active play. Different areas allow children to change direction, choose alternative routes and combine sliding, balancing, crossing and interactive play.

Different play heights and three sliding options

XOXI405 features rotationally moulded polyethylene ramps at heights of 84 cm and 144 cm, connecting different play areas. These are complemented by two open polyethylene slides at heights of 84 cm and 144 cm, as well as a tube slide at a height of 144 cm with rotationally moulded polyethylene elements. The different sliding options provide more choice and allow children to discover alternative play routes.

Bridges, spiral pole and movement challenges

The active structure of XOXI405 is complemented by a curved tube bridge with a diameter of 80 cm and polyethylene elements, as well as a rope bridge made from 16 mm twisted ropes with aluminium handrails. A stainless steel tubular spiral pole provides another movement option, while the galvanised tubular activity course with rubber and rotationally moulded polyethylene elements adds further physical challenges.

Additional play area and interactive activities

The complex incorporates a smaller playhouse with aluminium supports and a four-pitched roof made of rotationally moulded polyethylene. The active elements are complemented by a polyethylene noughts and crosses activity panel with revolving spheres, while a 19 mm thick polyethylene bench and shelf with bevelled edges provide additional possibilities for calmer play scenarios.

EN AW-6060 aluminium construction and 100% recyclable polyethylene

The main structural supports of XOXI405 are made of EN AW-6060 aluminium profiles with a cross-section of 9 × 9 cm. The 112 × 112 cm polyethylene platforms feature aluminium frames. The complex also includes three roof domes, polyethylene parapets, ramps, slides and other rotationally moulded elements. The polyethylene used in the structure is 100% recyclable.

Playground equipment for architects and designers

XOXI405 is 949 cm long, 674 cm wide and 377 cm high. The fall heights are 45, 84 and 144 cm, while the required safety area is 1250 × 944 cm. These technical parameters allow designers to accurately assess the position of the complex within a site, the required safety space and its integration into the overall landscape or playground design. XOXI405 can be incorporated into projects for parks, schools, kindergartens, residential developments, hotels, resorts and other public or private outdoor spaces.

Complies with EN 1176 requirements

The XOXI405 children’s playground complex complies with EN 1176 requirements applicable to playground equipment. Compliance with this standard is an important technical criterion when designing professional children’s playgrounds for public and private spaces.

Technical data

• Model: XOXI405
• Collection: Oxi Line
• Equipment type: outdoor children’s playground complex
• Height: 377 cm
• Width: 674 cm
• Length: 949 cm
• Fall height: 45 / 84 / 144 cm
• Safety area: 1250 × 944 cm
• Standard: EN 1176

Construction and materials

• EN AW-6060 aluminium supports – 9 × 9 cm;
• 112 × 112 cm polyethylene platforms with aluminium frame;
• one 84 cm and one 144 cm high rotationally moulded polyethylene ramp;
• stainless steel tubular spiral pole;
• three roof domes made of rotationally moulded polyethylene;
• parapets made of rotationally moulded polyethylene;
• one 84 cm and one 144 cm high rotationally moulded polyethylene slide;
• tube slide at a height of 144 cm with rotationally moulded polyethylene elements;
• curved tube bridge, diameter 80 cm, with polyethylene elements;
• rope bridge made from 16 mm twisted ropes with aluminium handrails;
• polyethylene noughts and crosses activity panel with revolving spheres;
• galvanised tubular activity course with rubber and rotationally moulded polyethylene elements;
• smaller playhouse with aluminium supports and a four-pitched rotationally moulded polyethylene roof;
• 19 mm thick polyethylene bench and shelf with bevelled edges;
• assembly kit with galvanised bolts and plastic plugs;
• polyethylene – 100% recyclable.

Create a play space children will want to return to

• A successful children’s playground project begins with the right equipment and thoughtful spatial planning. It is important to consider not only the functions and design of the playground equipment, but also the size of the site, safety areas, children’s age groups, circulation routes and the overall architectural and landscape concept.
• Monarda helps architects, landscape architects, designers, property developers, municipalities and other clients select professional children’s playground equipment for public and private projects. We consider the specific parameters of each site, required safety areas, planned play functions and the overall project concept.
• Designing a children’s playground for a park, kindergarten, school, residential development, hotel, resort or other public space? We can help select suitable playground complexes and other outdoor play equipment and provide the technical information required for your project.
• For prices, technical data, equipment selection or information for your project, contact: info@monarda-group.com
• Children’s playground equipment is not sold online – it is supplied for public, private and individual projects.

Note: copying products or modifying their design without the author’s consent is prohibited. Copyright is protected under applicable legislation.